Since the dry metallic ink, stem from the metallic ink, stem from the metal ink 1, this product adopts advanced importedacrylic resin and pigment through fine grinding senior systemcombination, applicable scope : a variety of metal, glass,ceramic, stone, electroplating ( aqueous electroplating ),anodized aluminum surface, electrostatic spray painting andbaking varnish face products and silk screen printing, withoutcuring agent, without baking, can obtain excellent adhesion. 2,product characteristics: flat, adhesive force is good, goodleveling, hardness, resistance to alcohol, punching resistance,scratch resistance, chemical resistance. 3, thinner: recommendthe company matching special thinner open oil. 4, curing agent:This product without adding curing agent, do not add notmatching curing agent, will affect the results of 5, ink deployment method: mixing before adding diluent 10% dilution to printing for viscosity. In 6, the drying time: surface dry timenatural volatile 5-10 minutes, drying time is in 24 hours, 48hours to reach the best performance, 80℃oven and bake for 30 minutes with more excellent performance. 7, use the term: halfexpired please, abandoned, and other additives the remaining ink unrecyclable. [ note ] 1, the use of ink printing testconfirmation after the mass production. 2, do a good job by print surface to remove grease and impurity, to promote the attachment effect. 3, adhesion, hardness, acid resistance,alcohol resistance, chemical resistance, scratch resistance,abrasion resistance and other properties of detection, fullycured before detection. 4, without permission, may not use theseries of ink and other types of ink mixing and matching. In 5,screen printing with appropriate drawing paste the company special thinner slow dry more suitable printing process. 6, pay attention to operation workshop humidity, humidity crosses congress to affect adhesion, high temperature easy plugging. [results ] 1 ink performance test, 3M gummed paper in thepaintings of the ink surface angle of 45 degrees to quickly pulled off the oil. 2, 99% pure alcohol 500G force on the surface of the printing ink rub 100 times withoutdecolorization. [ ] the 1 ink used safety rules, ink, diluent,use and storage of fireworks prohibited 2, use pay attention to the construction of places of ventilation in good condition. 3,try to avoid direct contact with the skin. In 4, this product is inadvertently splashed entrance, nose, eyes, ears, use a large number of water washing or direct help doctor. 5, allergy to the chemicals, before use should be coated with a layer ofskin to help skin cream or wearing impermeable gloves. 6, pay attention to operation workshop humidity, humidity crosses congress to affect adhesion, high temperature easy plugging